Cottonwood Heights Foundation Pros
Patio Lifting in Cottonwood Heights, UT
Patio lifting in Cottonwood Heights, UT: polyjacking raises settled patio slabs and restores a level, safe surface. Free estimates available.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Cottonwood Heights and nearby communities.
A patio slab that's dropped an inch at one corner is almost always soil settling unevenly beneath it, common on bench-grade lots where clay soil expands and contracts with seasonal moisture. Patio lifting raises the settled section back to level using polyurethane foam injected through small drill holes, rather than tearing out and repouring the slab.
Cottonwood Heights Foundation Pros handles this with minimal disruption to surrounding landscaping or patio furniture footprints, since the injection points are small and the foam cures within minutes.
Materials
Materials and methods for Patio Lifting
The lift only lasts if the right materials go in and the finish matches the existing slab.
Polyurethane Foam
Lifts patio slabs with minimal disturbance to surrounding plantings or hardscape features.
Patch Compound
Fills drilled access holes so repaired spots blend into the rest of the patio surface.
Joint Filler
Restores expansion joints disrupted during the lifting process.
Surface Sealant
Protects the patio against moisture exposure and seasonal freeze-thaw cycling.
Leveling Tools
Confirm consistent elevation across the full patio slab, not just the injection point.
Bonding Agent
Helps patch material adhere securely to the existing concrete for a lasting repair.
Questions on materials?
Get a Free EstimateHow it works
How our Patio Lifting process works
Step 1Patio Assessment
Settled or uneven patio sections are identified and measured for the lift plan.
Step 2Access Point Drilling
Small holes are drilled at points chosen to raise the section evenly.
Step 3Foam Injection
Expanding material is injected beneath the slab to lift it gradually.
Step 4Level Verification
Elevation is checked throughout to hit the correct final height.
Step 5Hole Patching
Access points are filled and smoothed to match the surrounding surface.
Step 6Final Walkthrough
The patio is reviewed with you to confirm a level, stable finish.
Timeline
How long does a Patio Lifting take?
Most patio lifting jobs are completed in a single visit, often in just a few hours.
- 01
Consult and measurement
same day - 02
Drilling and injection
4 hours2 to
- 03
Foam cure time
15 minutes
- 04
Patch and joint finishing
same visit
- 05
Patio ready for furniture and foot traffic
same day
Need a schedule that fits?
Get a Free EstimateWhat's included
What's included with Patio Lifting
Typically included: drilling, foam injection, elevation verification, hole patching, joint filler.
Optional: full slab sealant application, lift extended to an adjoining walkway or step.
Customer prep: clear patio furniture, planters, and grills off the slab before the crew arrives.
Want a clearer scope?
Get a Free EstimateCodes & permits
Permits and codes for Patio Lifting
Check with Salt Lake County or Cottonwood Heights city if your patio is attached to a covered structure or deck footing.
| Typically needs a permit | Often no permit |
|---|---|
| Patio work tied into a covered structure's footing or load-bearing support | Standard foam injection lifting of an existing residential patio slab |
Need help with permits?
Get a Free EstimateCost
What does a Patio Lifting cost in Cottonwood Heights?
Price scales with slab size and how uneven the settlement has become. Ask for a free estimate and we'll measure the settlement before quoting a range.
| Project type | Typical range | What’s included |
|---|---|---|
| Single patio section | $400–$900, | one sunken corner or panel. |
| Standard patio slab | $900–$2,200, | typical single-slab residential patio. |
| Large or multi-section patio | $2,200–$5,000, | wraparound or multi-slab layouts. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Patio Lifting
| DIY | Hire a pro |
|---|---|
| Sealing hairline surface cracks with a concrete caulk | Calculating the right foam volume to lift a slab evenly without overdoing it |
| Filling small chips along a slab edge | Placing injection points so the lift is uniform across the whole section |
| Regrading soil near the patio to redirect surface water | Diagnosing whether the settlement will recur without addressing drainage nearby |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Patio Lifting
Call for a free estimate before an uneven patio becomes a tripping hazard or a water-pooling problem.
- A patio slab has visibly dropped at one corner or edge
- Water collects on the patio instead of draining away
- A slab seam has become a trip hazard for foot traffic
- Soil has visibly eroded or settled beneath a patio edge
Seeing warning signs?
Get a Free EstimateFAQs
Patio Lifting FAQs
How much does patio lifting cost in Cottonwood Heights?
Most residential patio lifts run $400 to $2,200 for a single slab section, with larger multi-section patios running higher.
How long does patio lifting take?
Most patio lifts are finished in a few hours since the polyurethane foam cures within about 15 minutes of injection.
Is foam injection better than replacing the patio slab?
For settlement-related sinking, yes. Lifting the existing slab costs a fraction of demolition and repour, and the foam cures fast enough to use the patio the same day.
Do I need a permit for patio lifting?
Standard slab lifting usually doesn't need a permit. Patios tied into a covered structure's footing might require one.
Can I lift a sunken patio slab myself?
Sealing small cracks is fine to DIY. Lifting the slab evenly requires injection equipment and elevation monitoring that aren't practical without professional tools.
Will the patio settle again after lifting?
It can if the underlying soil movement isn't addressed, which is why we look at drainage and grading around the patio as part of the job.
What causes a patio to sink unevenly?
Soil consolidation under one section of the slab, often from moisture swings in bench-area clay soil, is the most common cause.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Cottonwood Heights, UT: push piers, helical piers, and crack injection with free estimates.
Piering and Underpinning
Push pier and helical pier underpinning in Cottonwood Heights, UT, for settling foundations on bench-grade clay and fill soil. Free estimates.
Wall Stabilization
Bowing basement wall stabilization in Cottonwood Heights, UT using wall anchors and carbon fiber straps. Free estimates, written scope.
Ask about Patio Lifting
Tell us about the project and how to reach you.